Rule C Series pump for oxygenating fish ponds and bait tanks. The pumps feature an angled 3/4″-14 NPSM plastic pipe that is 102 mm long for hull penetration, requiring a 25mm bore. It is recommended to install a Rule 73 filter to prevent debris from entering the tank.
The pump should have sufficient capacity to exchange the water in the tank within 10 minutes. Larger is not better, as high capacity causes air pockets. The pump should be mounted as low and close to the boat's bottom as possible, as it is not self-priming and requires water pressure from the outside, staying below the waterline.
The pump is equipped with a plugged 1/2″ NPT connection before the pump housing, allowing the same penetration to be used for a washdown pump if needed. A hose connection M1057-1/2NPTx19 for 19 mm hose is available as an accessory. The pump's motor is replaceable, and hose connections in various designs are available as accessories.
PRODUCT SPECIFICATION
Article no
401C
403C
405C
Capacity
31.5 l/min
50.4 l/min
69.3 l/min
1m
21.4 l/min
Rule C Series (401C) pump for fish ponds
In stock Few left in stock
Rule C Series pump for oxygenating fish ponds and bait tanks. The pumps feature an angled 3/4″-14 NPSM plastic pipe that is 102 mm long for hull penetration, requiring a 25mm bore. It is recommended to install a Rule 73 filter to prevent debris from entering the tank.
The pump should have sufficient capacity to exchange the water in the tank within 10 minutes. Larger is not better, as high capacity causes air pockets. The pump should be mounted as low and close to the boat's bottom as possible, as it is not self-priming and requires water pressure from the outside, staying below the waterline.
The pump is equipped with a plugged 1/2″ NPT connection before the pump housing, allowing the same penetration to be used for a washdown pump if needed. A hose connection M1057-1/2NPTx19 for 19 mm hose is available as an accessory. The pump's motor is replaceable, and hose connections in various designs are available as accessories.
Refers to which product family the product belongs to. In many cases, there are matching reels and rods within the same product family. These items are designed to work together.
